225W in 5-Channels
To complement the NEW AVM 60 A/V Processor, Anthem introduces the new MCA 525, 325 and 225 power amplifiers. Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background.
Like all Anthem products the MCA 525, MCA 325 and MCA 225, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; advanced power supply regulators; oversized aluminum heatsinks; custom-designed dual binding posts; and patented auto-on/off circuitry. Superior craftsmanship that is reflected in clean, clear, audiophile-quality sound from top to bottom of the frequency spectrum.
INPUTS / OUTPUTS |
Inputs |
Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack) |
Outputs |
Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack) |
SWITCHES |
Front Panel |
Power (On/Off) |
Rear Panel |
3 On/Off Modes (Trigger, Manual, Auto) |
THD AT 100W |
at 1 kHz |
0.0010% |
at 20 kHz |
0.015% |
IMD AT 100 W |
ITU-R (19 kHz + 20 kHz) |
0.0005% |
SMPTE (60 Hz + 7 kHz) |
0.002% |
FREQUENCY RESPONSE, 20 HZ TO 20 KHZ |
open circuit |
± 0.1 dB |
8Ω |
± 0.1 dB |
4Ω |
± 0.1 dB |
2Ω |
± 0.2 dB |
OTHER SPECIFICATIONS |
SNR, IEC-A, ref. 225 W |
120 dB |
Power Bandwidth, -3 dB at 200 W into 8 ohms |
90 kHz |
Slew Rate |
30 V/μs |
Damping Factor, 20 Hz to 1 kHz |
300 |
Channel Separation, 100 Hz to 10 kHz |
>65 dB |
Input Impedance (RCA / XLR) |
10 kΩ / 15 kΩ |
Input Sensitivity, 225 W into 8 Ω |
1.5 Vrms |
Voltage Gain |
29 dB |
POWER CONSUMPTION |
|
standby |
idle |
typical |
high output |
MCA 525 |
2.0 W |
80 W |
550 W |
1200 W |
MCA 325 |
1.4 W |
47 W |
350 W |
750 W |
MCA 225 |
1.0 W |
35 W |
240 W |
500 W |
DIMENSIONS |
Height |
6-5/8" (16.9 cm) |
Height with Rackmount Kit |
4U |
Width |
17-1/4" (43.9 cm) |
Depth |
18-1/8" (46 cm) |
WEIGHT |
MCA 525 |
61 lb (27.5 kg) |
MCA 325 |
43 lb (19.5 kg) |
MCA 225 |
40 lb (18 kg) |
POWER REQUIREMENT |
|
|
220-240 V version: |
In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. |