Tannoy Highline 300 Floor system

The Arena HighLine 300c is designed primarily as a low profile, full range loudspeaker for use in conjunction with Plasma or LCD flat screens. The supplied bracket system and cable management ensure a close to wall mounting and a visual effect that blends with the décor; important in high style installations such as lounges, bars, hotels and boardrooms.

The HighLine 300c can be used as left, right and centre around the screen, while low frequency reinforcement can be provided by adding the Tannoy V Series VS10 BP subwoofer in conjunction with the TDX1 electronic system controller.

ARENA HIGHLINE 300 CENTRE & SATELLITE SPEAKER
Performance
Recommended Amplifier Power	25 - 75W RMS
Maximum Sensitivity (2.83V @ 1m)	87dB
Nominal Impedance	8 Ohm
Frequency Response (-6dB)	95Hz - 62kHz
Crossover frequency	300Hz, 6.0kHz
Drive Units
Driver Type	4 x 75mm (3”) LF/MF, 1 x 19mm (0.75”) HF
Magnetic Shielding	Yes
Construction
Satellite Weight	5 kg (11.1 lbs)
Satellite Dimensions (H x W x D)	590 x 109 x 101mm (23.23 x 4.29 x 3.98”)
Centre Weight	5 kg (11.1 lbs)
Centre Dimensions (H x W x D)	109 x 590 x 101mm (4.29 x 23.23 x 3.98”)
Finish	Matt black, matt silver
Accessories
Supplied	Aluminium wall bracket for each satellite and the centre, centre channel table stand
Optional	Floor stand for satellites, table stand for satellites
ARENA HIGHLINE 300 TOWER SPEAKER
Performance
Recommended Amplifier Power	25 - 75W RMS
Maximum Sensitivity (2.83V @ 1m)	87dB
Nominal Impedance	8 Ohms
Frequency Response (-6dB)	80Hz- 62kHz
Crossover frequency	300Hz, 6.0kHz
Drive Units
Driver Type	4 x 75mm (3”) LF/MF, 1 x 19mm (0.75”) HF
Magnetic Shielding	Yes
Construction
Weight	10 kg (22.3 lbs)
Dimensions (H x W x D)	1055 x 173 x 175mm (41.53 x 6.81 x 6.89”)
Finish	Matt black, matt silver
Supplied Accessories	Floor coupling spikes and polished floor protectors
ARENA HIGHLINE TS300 SUBWOOFER TECHNICAL SPECIFICATIONS
Performance
Output Power	300W RMS
Low Frequency Response (-6DB)	29Hz
Limit For Usable Output	16Hz
Input	2 x Line level phono (RCA)
Input Filter (-6DB)	2nd order low pass, 50Hz - 150Hz
Auto Mute	After approximately 12 minutes absence of input signal
Additional Features	Phase control, crossover defeat switch for LFE operation, soft limiting to avoid overload, LF extension control
Mains Voltage	120V Nominal AC ~ 60Hz, 230V Nominal AC ~50Hz
Mains Fuse	120V - T3.15AL/ 250V, 230V - T1.6AL/ 250V
Maximum Power Consumption	416VA
Drive Unit
Driver Type	1 x 250mm (10”)
Construction
Enclosure Type	Closed Box
Enclosure Volume	20.0 LITRE (0.7 cu.ft.)
Enclosure Dimensions (Excluding Feet)	445 x 350 x 210mm (17.51 x 13.78 x 8.26”)
Enclosure Weight	13kg (28.7lbs)
Finish	Gloss black, gloss silver