Tannoy Dimension TD10

 

TD10

At the heart of the TD19 is a 250mm (10.00") Tannoy Dual Concentric™ drive unit featuring a new cone material and twin-roll surround providing enhanced midrange performance and tight, fast bass with tremendous low frequency extension. The cone material is manufactured from a composite of several different fibres. The mix of fibres has been carefully chosen to obtain a light but very stiff structure providing exceptional grip and control of bass transients.

The multi-faceted trapezoidal design of the cabinet, with it's sloping top panel, reduces internal standing waves to minimise colouration. The birch ply enclosure is comprehensively internally braced to improve rigidity and further reduce the amplitude of panel resonance.

The finish is a stunning combination of real cherry veneer and polished alloy trim. The matching SuperTweeter™, machined out of a solid block of alloy, sits on a cushion of black velvet so as not to re-radiate high frequency energy off the cabinet top panel. The acoustically inert velvet and the low diffraction rounded edge of the baffle ensure superior imaging. Two heavyweight solid aluminium cones and rear floor-coupling spikes ensure any residual cabinet energy is efficiently dissipated

TD10
PERFORMANCE
Recommended amplifier power	50 - 200 Watts RMS
Continuous power handling	130 Watts RMS
Sensitivity (2.83Volts @ 1 metre)	91dB
Nominal impedance	6 Ohms
Frequency response	38Hz - 54kHz -6dB usable output to 100kHz
DRIVE UNITS
Dual Concentric™ high frequency	25mm (1.00") 50-micron aluminium dome with Tulip WaveGuide™
Dual Concentric™ low frequency	250mm (10.00") paper pulp cone with a twin roll impregnated fabric surround
SuperTweeter™	25mm (1.00") 25 micron titanium dome, with neodymium magnet system
Dispersion	90° conical
CROSSOVER
Frequency Dual Concentric™	1.2 kHz
SuperTweeter™	14 kHz
Type Dual Concentric™	Bi-wired, hard-wired passive, low loss, 3rd order low pass, 1st order high pass
SuperTweeter™	3rd order high pass filter
CONSTRUCTION
Enclosure type	Twin port reflex
Volume	67 Litres
Dimensions	1015 x 350 x 370mm (40.00 x 13.80 x 14.60")
Additional features	High-density 25mm (1.00") birch ply enclosure, internally cross braced
Weight	32 kgs (70.5 lbs)
Finish	American cherry with polished alloy trim detail
Front baffle panel	High-density 38mm (1.50") birch ply