Rotel RX-1052

The RX-1052 can be the multi-room/multi-source heart of a “whole house” audio/video system! When used with six channels of external amplification – either three stereo amps or an all-in-one six channel model like Rotel’s RMB-1066 – the RX-1052 lets you direct up to eight audio or A/V sources to as many as four different locales. You maintain fully independent source selection, power on/off, and volume adjustment for each zone! And if you want to “get down and party,” the RX-1052’s “Party Mode” lets you do just that by piping the same source throughout your home. The RX-1052 includes four independent composite video outputs, too, so you can watch what you want where you want to watch it. Independent IR (infrared) links give you source control from any room while four separate 12 volt “trigger” circuits energize just those system components you need for maximum enjoyment – and maximum energy conservation.

Continuous Amplifier Power	100 watts/channel (20–20k Hz, <0.05% THD, 8 ohms)
Total Harmonic Distortion	<0.05% at rated power
Intermodulation Distortion (60 Hz:7 kHz)	<0.05% at rated power
Frequency Response	Line Level: 10 Hz - 70 kHz, ±3 dB Phono: 20 Hz - 20 kHz, ±1 dB
Signal to Noise Ratio (IHF “A” weighted)	Line Level: 92 dB Phono: 74 dB
Input Overload	Line Inputs: 5 V Phono Inputs: >120 mV
Preamplifier Output Voltage	1.0 V (160 mV Input)
Input Sensitivity/Impedance	Line Level: 160 mV/47 kohms Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble)	±8 dB at 100 Hz/10 kHz
Video	-
Frequency Response	3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio	45 dB
Input Impedance	75 ohms
Output Impedance	75 ohms
Output Level	1 volt
FM Tuner	-
Usable Sensitivity	14.2 dBf
50dB Quieting Sensitivity	20.2 dBf (mono) / 45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf)	70 dBf (mono) / 65 dBf (stereo)
Harmonic Distortion (at 65 dBf)	0.3% (mono) / 0.5% (stereo)
Frequency Response	30 Hz-14 kHz, ±1.5 dB
Capture Ratio	2.0 dB
FM Tuner—Cont.	-
Alternate Channel Selectivity	47 dB (±400 kHz)
Spurious Response Ratio	80 dB
Image Response Ratio	65 dB
IF Response Ratio	80 dB
AM Suppression Ratio	52 dB
Stereo Separation (100Hz/1 kHz/10 kHz):	40 dB/45 dB/35 dB
Output level	1.0 V
Antenna Input	75 ohms unbalanced
AM Tuner	-
Sensitivity	500 μV/m
Selectivity	25 dB
Image Response Ratio	35 dB
Signal to Noise Ratio	40 dB
Output level	250 mV
Antenna Input	Loop Antenna
General	-
Power Consumption	300 watts 28.4 watts (idle) 13.2 watts (standby)
Power Requirements (AC)	115 volts, 60 Hz (USA version) 230 volts, 50 Hz (European version)
Weight	10.8 Kg/30.4 lb.
Dimensions (W x H x D)	432 x 121 x 359 mm 17” x 43/4” x 141/8”
Front Panel Height	(feet removed/for rack mount) 109 mm / 4.3”