Rotel RA-06

For a quarter of a century, Rotel has led the way in the design of integrated amplifiers. The RA-06 is our new reference integrated amp, designed to drive its full, robust sound through even power-hungry speakers. You’ll find its output is sufficient for all but the largest rooms and most demanding loudspeakers, and in those situations it can be bi-amped with an RB-06 power amplifier to create a fearsome double act. Also includes separate pre/power designs in a single chassis, symmetrical circuit board layout, short signal path routing, UK--designed metal film resistors, US-made super low-noise resistors, Rotel toroidal transformer and power supply, electronic speaker protection, and 12v trigger power control.

Model	RA-06
Continuous Power Output (20-20 kHz, < 0.03%, 8 ohms)	70 watts/ch
Total Harmonic Distortion (20Hz-20kHz)	< 0.03% at rated power, 1/2 power or 1 watt
Intermodulation Distortion (60 Hz : 7 kHz, 4:1)	< 0.03% at rated power, 1/2 power or 1 watt
Frequency Response	-
Phono Input 20Hz-15kHz	± 3dB
Line Level Inputs 10Hz-100kHz	+1, –3dB
Damping Factor (20-20,000 Hz, 8 ohms)	180
Input Sensitivity / Impedance	-
Phono Input 2.5mV / 47 kOhms	2.5mV / 47 kOhms
Line Level Inputs 150 mV / 24 kOhms	150 mV / 24 kOhms
Input Overload	-
Phono Input	180mV
Line Level Inputs	5V
Premp Output / Impedance	1V / 470 Ohms
Tone Controls - Bass / Treble	±6 dB at 100Hz / 10kHz
Signal to Noise Ratio (IHF “A” weighted)	-
Phono Input	80 dB
Line Level Inputs	100 dB
Power Requirements	-
European Version	230 Volts, 50 Hz
Power Consumption	300 W, 36 W - Idle, 3.7 W - Standby
Dimensions (W, H, D)	435 x 92 x 342 mm
Panel Height	80 mm
Weight (net)	7.7 kg
Available Finishes	Silver / Black
12 volt Trigger	Yes
Remote Control	Yes
Inputs	Phono, CD, Tuner, Aux 1, Aux 2, Media Player
Loudspeaker outputs	On / Off A, B, A+B
Headphone output	Yes - 3.5 mm jack