Pro-Ject Phono BOX SE MKII

Phono Box SE II is an even better phono preamp, both on technical and acoustic grounds. It is equipped with a higher grade power supply and offers a wide range of adaptation possibilities. It also has switchable subsonic fi lter. This unit offers a highly musical performance for MM and MC cartridges.  

 

 

 

MM/MC Phono Pre-amplifier  

 

Good sound from sound technology  

• Metal case shields the electronics from vibrational and electromagnetic interference  

• Selectable impedance for MC cartridges  

• Selectable load resistance for MM cartridges  

• Optimal channel separation through dual-mono circuitry  

• Subsonic filter selection switch located at the rear of the unit  

• Special low-noise ICs used  

• Gold plated RCA connection sockets  

• Outboard power supply included  

• DC operation with battery possible  

Features  

• Amplification and RIAA equalisation for MM and MC cartridges  

• Available in black and silver 

Technical data	Pro-Ject Phono Box SE II
Input impedances, MM	120, 220, 340 and 440pf/47kohm
Input impedances, MC	17, 18, 20, 22, 69, 100 and 220ohms/120pF
Output voltage	300mV/1kHz at 3mV/1kHz (MM input)
Gain, MM	40dB
Output voltage	300mV/1kHz at 0,3mV/1kHz (MC input)
Gain, MC	60dB
Noise floor, MM	95dB (100dB - A weighted)
Noise floor, MC	75dB (80dB - A weighted)
THD MM	0,03%
THD MC	0,1%
RIAA-equalisation curve accuracy	20Hz - 20kHz / max. 0,3dB
Subsonic filter	at 18Hz with 24dB/octave
Outboard power supply	16V/1.000mA AC, suitable for your country's mains supply
	DC operation with battery
Power consumption	16V/180mA AC
DC power source	from ±12 to ±18V DC
Dimension W x H x D	103 x 72 x 158mm
Weight	1.050g without power supply