Pro-Ject Phono BOX II USB

Today, many amplifiers do not have a specific phono cartridge input. Phono Box II is ideal for use with these amplifiers and allows the use of MM and MC cartridges. The output of Phonobox II can easily be connected with a line-input (AUX,...)  

MM/MC Phono Pre-amplifier  Good sound from sound technology  

• Metal case shields the electronics from vibrational and electromagnetic interference  

• Optimal channel separation through dual-mono circuitry  

• Special low-noise ICs used  

• Gold plated RCA connection sockets  

• Outboard power supply included  

Features  

• Amplification and RIAA equalisation for MM and MC cartridges  

• Phono MM/MC selection switch located at the rear of the unit  

• Small size allows installation close to record player  

• Available in black and silver  

Technical data	Pro-Ject Phono Box II
Input impedance, MM	47kohms/120pF
Input impedance, MC	100ohms/120pF
Gain, MM	40dB
Output voltage typically	300mV/1kHz at 3mV/1kHz (MM input)
Gain, MC	60dB
Output voltage typically	300mV/1kHz at 0,3mV/1kHz (MC input)
Max. output	9,5V (1kHz)
Noise floor, MM	86dB (94dB - A weighted)
Noise floor, MC	68dB (75dB - A weighted)
THD, MM	0,01%
THD, MC	0,05%
RIAA-equalisation curve accuracy	20Hz - 20kHz / max. 0,5dB
Outboard power supply	16V/200mA AC, suitable for your country's mains supply
Power consumption	16V/30mA AC
Dimension W x H x D	103 x 38 x 115mm
Weight	570g without power supply